<

張宏宜 Horng-Yi Chang
教授

分機:7103

E-mail:hychang@mail.ntou.edu.tw

 



學歷
Ph.D.: 清華大學材料科學工程研究所
(Dept. of Materials Science and Engineering, National Tsing-Hua University , Taiwan )
M.S.: 清華大學材料科學工程研究所
(Dept. of Materials Science and Engineering, National Tsing-Hua University , Taiwan )
B.S.: 成功大學礦業及石油工程系
(Dept. of Minerals and Petroleum Engineering, National Cheng-Kung University , Taiwan )

經歷

職 級

單 位

部 門

教授 海洋大學 輪機工程學系

助理教授

海洋大學

輪機系

正研究員

工業技術研究院

材料化工所

研究員

工業技術研究院

工業材料所

助理教授 ( 兼 )

國立臺北科技大學

機械系

經理

凱宣科技公司

元件部

博士後研究

清華大學

材料科學中心

副工程師

原子能委員會

核能研究所

助理工程師

和成欣業公司

研發部

Referee

 

Ferroelectrics ; J. European Ceram . Soc.

授課科目

普通物理、能源與動力工程概論、材料性質學、能源材料、 工程材料、電極動力學、介電原理
著作目錄


[A] Journal Papers

  1. Yao-Ming Wang, Chia-Ming Chang, Jing-Shiang Shih, Horng-Yi Chang*, 2016,“Novel lanthanum and cerium coatings on (Ba, Sr)-ferrate cathodes for intermediate-temperature solid oxide fuel cells”,Journal of the European Ceramic Society.
  2. Yao-Ming Wang, Chia-Ming Chang, Jing-Shiang Shih, Horng-Yi Chang*, 2016,“Novel lanthanum and cerium coatings on (Ba, Sr)-ferrate cathodes for intermediate-temperature solid oxide fuel cells”,Journal of the European Ceramic Society.
  3. Chien-Yie Tsay, Yi-Hsiang Lin, Yao-Ming Wang, Horng-Yi Chang, Chien-Ming Lei, and Shien-Uang Jen, 2016,“Electrical transport properties of CoMn0.2?xGaxFe1.8O4 ferrites using complex impedance spectroscopy”,AIP Advances.
  4. Horng-Yi Chang*, Chung-Hao Yi, Chia-Hsin Lin, Syh-Yuh Cheng, 2015,“Chalcogenide Photosensitized Titania Nanotube Arrays”,Journal of Alloys and Compounds.
  5. Wei-Jei Tzeng, Mei-Lun Wu, Li-Jiaun Lin, Horng-Yi Chang*,2015,“Chalcogenide Photosensitized Titania Nanotube Arrays”,Materials Chemistry and Physics.
  6. Horng-Yi Chang*, Chen-Yu Wu, Kuocheng Huang, Yunshan Lo, Iwen Shen, Hsingchia Wang, 2014,“Preparation and Characterization of Blue-Light-Excited Nanophosphors Using an Economically Low-Energy Process”,ECS Journal of Alloys and Compounds.
  7. Yao-Ming Wang*, Chia-Hsin Lin, Ching-Iuan Sheu, Ying-Chang Hung, and Horng-Yi Chang*, 2014,“Ceria Diffusion and Electrical Properties on Lanthanum doped Strontium Titanate”,ECS Transactions.
  8. Wei-Jei Tzeng, Mei-Lun Wu, Li-Jiaun Lin, Horng-Yi Chang*, 2013,“Effect of In2S3 Buffer Layer in TiO2/In2S3/CuInS2 Structure”,Advanced Materials Research .
  9. Wei-Jei Tzeng, Mei-Lun Wu, Li-Jiaun Lin, Horng-Yi Chang*, 2013,“Effect of In2S3 Buffer Layer in TiO2/In2S3/CuInS2 Structure”,Advanced Materials Research .
  10. Horng-Yi Chang*, Yao-Ming Wang, Chia-Hsin Lin, Syh-Yuh Cheng, 2013,“Novel Microwave Reduction Sintering for Perovskite Anode”,Advanced Materials Research .
  11. Horng-Yi Chang*, Chen-Yu Wu, Ching-Iuan Sheu, Chia-Hsin Lin and Syh-Yuh Cheng, 2013,“Phosphors Surface Modification and Luminescence Enhancement by Microwave Energy”,Materials Letters.
  12. Yao-Ming Wang, Chien-Ming Lei and Horng-Yi Chang* ,2012,“Electrical Properties of Lanthanum Strontium Titanates Modified by Microwave Sintering”,Ferroelectrics .
  13. Chung-Hao Yi, Chia-Hsin Lin, Yi-Hui Wang, Syh-Yuh Cheng and Horng-Yi Chang*, 2012,“Fabrication and Characterization of Flexible PZT Fiber and Composite”,Ferroelectrics .
  14. Ping-Wei Hsu, Fang-Hsin Kao, Shing-Hoa Wang, Jer-Ren Yang, Horng-Yi Chang, Yao-Ming Wang, Qian-Xuan Lin, 2012, “Twinned Formation in Weld Metal of Titanium Bearing Nano Precipitated High Strength Steel”,Materials Chemistry and Physics.
  15. AnkaPing-Wei Hsu, Fang-Hsin Kao, Shing-Hoa Wang, Jer-Ren Yang, Horng-Yi Chang, Yao-Ming Wang, Qian-Xuan Lin, 2012, “Twinned Formation in Weld Metal of Titanium Bearing Nano Precipitated High Strength Steel”,Materials Chemistry and Physics.
  16. Ankam Bhaskar, Horng-Yi Chang, Tsun-Hsu Chang, Syh-Yuh Cheng, 2012, “Microwave Annealing of YAG:Ce Nanophosphors”,Materials Letters.
  17. Horng-Yi Chang*, Shing-Hoa Wang, Yao-Ming Wang, Chien-Wei Lai, Chia-Hsin Lin, Syh-Yuh Cheng, 2012, “Novel Core-shell Structure of Perovskite Anode and Characterization”,International Journal of Hydrogen Energy.
  18. Horng-Yi Chang*, Wei-Jei Tzeng, Chia-Hsin Lin, Syh-Yuh Cheng, 2011, “Ionic compounds lamination reaction and characteristics of photosensitive copper indium sulfide on titania nanotube arrays”,Journal of Alloys and Compounds.
  19. H.Y. Chang, Y.M. Wang, C.H. Lin, S.Y. Cheng, 2011, “Effects of Rapid Process on the Conductivity of Multiple Elements Doped Ceria-based Electrolyte”, J. Power Sources, 196, 1704–1711. (NSC 98-2622-E-019-005-CC3)
  20. H.Y. Chang, H.D. Lee, M.L. Wu, L.J. Lin, 2010,”Highly Efficient Cathodoluminescence of Nanophosphors by Solvothermal Route”, J. Lumin., 130, 969–975. (NSC 97-2221-E-019-002)
  21. H.Y. Chang, W.J. Tzeng, 2010, "Stoichiometry of Photosensitive CuInS2 Coating into TiO2 Nanotubes”, submitted to Thin Solid Films (NSC 98-2221-E-019 -010)
  22. H.Y. Chang, W.J. Tzeng, S.Y. Cheng, 2009,”"Modification of TiO2 Nanotube Arrays by Solution Coating”, Solid State Ionics, 180, 817-821. (NSC 96-2218-E-019-002)
  23. 王耀明、謝濠全、張宏宜, 2009, ”低溫燒結多元摻雜CeO2基固態電解質之研究”, 53(3), 17-23. (NSC 98-2622-E-019-005-CC3)
  24. 曾韋傑, 張宏宜, 2009, “奈米管陣列光敏能源材料”, 燃燒季刊, 第十八卷, 第二期, 21-30. (NSC 96-2218-E-019-002)
  25. 張宏宜, 2009, “綠色微波輔助有機聚合技術”, 化工資訊與商情, 69期, 59-67.
  26. A. Bhaskar, T.H. Chang, H.Y. Chang and S.Y. Cheng, 2009, “Pb(Zr0.53Ti0.47)O3 Thin Films with Different Thickness Obtained at Low Temperature by Microwave Irradiation”, Appl. Surf. Sci., 255, 3795-3800.
  27. H.Y. Chang, Y.R. Wang, M.L. Wu, L.J. Lin, L.N. Tsai, S.Y. Cheng, 2008, “Luminescence and crystallinity enhancement using nano-oxide”, Mater. Chem. Phys., 112, 607-611. (NSC 96-2218-E-019-002)
  28. H.Y. Chang, S.Y. Cheng, C.I. Sheu, 2008, “Microwave sintering of ferroelectric PZT thick films”, Mater. Lett., 62, 3620–3622.
  29. H.Y. Chang, C.I. Sheu, S.Y. Cheng, H.C. Wu, Z.Z. Guo, 2007, “Synthesis of Li1.1Ni1/3Co1/3Mn1/3O2 cathode material using spray-microwave method”, J. Power Sources, 174, 985–989.
  30. A. Bhaskar, H.Y. Chang, T.H. Chang and S.Y. Cheng, 2007, “Effect of microwave annealing temperatures on lead zirconate titanate thin films”, Nanotechnology, 18, 395704 (7pp).
  31. H.Y. Chang, C.I. Sheu, S.Y. Cheng, 2007, “Microwave enhanced sintering of tape-cast ferroelectric films”, J. Eur. Ceram. Soc., 27, 3793–3797.
  32. A. Bhaskar, T.H. Chang, H.Y. Chang and S.Y. Cheng, 2007, “Low-temperature crystallization of sol–gel-derived lead zirconate titanate thin films using 2.45 GHz microwaves”, Thin Solid Films, 515, 2891~2896.
  33.   H.Y. Chang , C.I. Sheu , S.Y. Cheng , H.C. Wu, Z.Z. Guo, 2006, “ Synthesis of Li 1.1 Ni 1/3 Co 1/3 Mn 1/3 O 2 Cathode M aterial using Spray-Microwave Method ”, J. Power Sources, being revised.
  34. Ankam Bhaskar, T.H. Chang, H.Y. Chang and S.Y. Cheng, 2006, “ Effect of microwave annealing on sol-gel-derived PZT thin films”, Acta Materialia, submitted.
  35. H.Y. Chang , S.Y. Cheng, C.I. Sheu, “Controlling Interface Characteristics by Adjusting Core-Shell Structure”, Acta Materialia, 52[18], 5389~5396 (2004).
  36. Y.J. Yang, C.I. Sheu, S.Y. Cheng, H.Y. Chang , “Si-Ca Species Modificaton and Microwave Sintering for Ni-Zn Ferrite” , J. Mag. and Mag. Mater., 284, 220~226 (2004).
  37. 張 宏 宜 , 洪尚河 , “ 微波促進材料界面結合之應用 ”, 工業材料雜誌 , 216 期 , 88~95 (2004).
  38.   H.Y. Chang , S.Y. Cheng, C.I. Sheu, Y.H. Wang, “ Core–shell structure of strontium titanate self-grown by a hydrothermal process for use in grain boundary barrier layers ”, Nanotechnology, 14, 603~608 (2003).
  39. 張 宏 宜 , “ 微波在材料的世界 ”, 陶業研究學會會刊 , 第二十二卷 , 第三期 , 1~9 (2003).
  40. C.I. Sheu, H.Y. Chang , S.Y. Cheng, “Study on Nano-grain Boundary-high Dielectric Integrated thin Film Capacitor”, J. Mater. Sci. & Eng., 35[1], 58 (2002).
  41.   H.Y. Chang , S.Y. Cheng, C.I. Sheu, Y.H. Wang, “Nano-grain-boundary Layer Modification for Semiconductive Film by Laser Annealing”, Proc. APAM2002, 71 (2002).
  42.   H.Y. Chang , S.Y. Cheng, Y.H. Wang, “Self-assembled Core-Shell Structure of Strontium Titanate by Hydrothermal Process”, TNT2002, 193(2002).
  43. L.M. Liang, C.T. Hu, H.Y. Chang , I.N. Lin, “Ba(Zn 1/3 Nb 2/3 )O 3 Ceramics Synthesized by Spray Pyrolysis Technique”, Ferroelectrics, 231[1-4], 831~36 (1999).
  44.   L.M. Liang, C.T. Hu, C.G. Chiou, H.Y. Chang , I.N. Lin, “Enhancing the Densification Process on Ba(Mg 1/3 Ta 2/3 )O 3 Microwave Dielectrics by Y 2 O 3 Incorporation”, Ferroelectrics, 231[1-4], 691~96 (1999).
  45.   Y.Y. Lin, C.T. Hu, H.Y. Chang and I.N. Lin, “Electrical Properties of the Positive Temperature Coefficient of Resistivity Materials with 490 ° C Critical Temperature”, J. Appl. Phys., 83[3], 1321~26 (1998).
  46.   C.T. Hu, H.W. Chen, H.Y. Chang and I.N. Lin, “Effect of SiO 2 Sintering Aids on High Critical Temperature Positive Temperature Coefficient of Resistivity Properties of (Pb 0.6 Sr 0.3 Ba 0.1 )TiO 3 Materials Prepared by Microwave Sintering Technique”, Jpn. J. Appl. Phys., Part I, 37[1], 186~91 (1998).
  47. C.H. Lin, H.Y. Chang and I.N. Lin, “Densification Behavior of Y 3 Fe 5 O 12 Materials Prepared by Microwave Sintering Process”, IEEE Trans. Magnetics, 33[5], 3415~17 (1997).
  48.   H.Y. Chang , H.W. Chen, C.T. Hu and I.N. Lin, “High T c Positive Temperature Coefficient Resistivity (Pb 0.6 Sr 0.3 Ba 0.1 )TiO 3 Materials Prepared by Microwave Sintering”, Ferroelectrics, 195, 65~68 (1997).
  49. H.Y. Chang , Y.Y. Lin, K.S. Liu, C.T. Hu, T.F. Lin and I.N. Lin, “Abnormal Resistivity-Temperature Characteristics of Semiconducting (Ba 1-x Pb x )TiO 3 Materials Prepared by Microwave Sintering”, Integ. Ferroelectrics, 13, 47~54 (1996).
  50.   H.Y. Chang , Y.Y. Lin, C.T. Hu, K.S. Liu, and I.N. Lin, "Modification on PTCR Behavior of (Sr 0.2 Ba 0.8 )TiO 3 Materials by Post-heat Treatment After Microwave Sintering", Integ. Ferroelectrics, 13, 55~62 (1996).
  51.   H.Y. Chang , K.S. Liu, C.T. Hu, T.F. Lin and I.N. Lin, “Double Critical Temperature Characteristics of Semiconducting (Ba 0.7 Pb 0.3 )TiO 3 Materials Prepared by Microwave Sintering”, J. Appl. Phys., 80[8], 4553~59 (1996).
  52. H.Y. Chang , K.S. Liu, C.T. Hu, and I.N. Lin, “Electrical Properties of Microwave Sintered (Sr 0.4 Pb 0.6 )TiO 3 Ceramics”, Jpn. J. Appl. Phys., 35, 656~62 (1996).
  53. H.Y. Chang , K.S. Liu and I.N. Lin, "Modification on PTCR Behavior of (Sr 0.2 Ba 0.8 )TiO 3 Materials by Post-heat Treatment After Microwave Sintering", J. Europ. Ceram . Soc., 16[1], 63~70 (1996).
  54.   I.N. Lin and H.Y. Chang , “Microwave Sintering of Semiconducting Perovskite and Their Electrical Properties”, Sinter. Tech., 439-46 (1996).
  55.   H.Y. Chang , K.S. Liu and I.N. Lin, "Electrical Characteristics of (Sr 0.2 Ba 0.8 )TiO 3 Positive Temperature Coefficient of Resistivity Materials Prepared by Microwave Sintering", J. Appl. Phys., 78[1], 423~27 (1995).
  56. H.Y. Chang , K.S. Liu and I.N. Lin, "Conventional and Microwave Sintering Studies of SrTiO 3 ", J. Mater. Res., 10[8], 2052~59 (1995).
  57. H.Y. Chang , K.S. Liu, H.W. Chen, C.T. Hu, I.N. Lin, B.J. Shaw, and J.T. Tan, “V-shaped Positive Temperature Coefficient of Resistivity Characteristics of Microwave Sintered (Sr 0.4 Pb 0.6 )TiO 3 ” , Mater. Chem. Phys., 42, 258~63 (1995).

[B] Conference Papers

  1. CChen-Yu Wu, Horng-Yi Chang, Chien-Ming Lei, Shu-Ting Cheng,“Boron Doping SrAl2O4:Eu2+, Dy3+ Behavior of Hydrothermal Process“(2016).
  2. Chen-Yu WYao-Ming Wang, Jang-Ping Wang, Horng-Yi Chang,“Fabrication and Characterization of Ba0.5Sr0.5FeO3-Pr2NiO4 Novel Composite Cathode for Intermediate-Temperature Solid Oxide Fuel Cell“(2016).
  3. Chen-Yu Wu, Chien-Ming Lei, Shu-Ting Cheng, Horng-Yi Chang,“Photoluminescence and Afterglow Enhancement of SrAl2O4:Eu2+, Dy3+ with Boron by Hydrothermal Process“(2016).
  4. 邱國峰,王耀明,張宏宜,“La0.3Sr0.7TiO3-CeO2複合陽極製備與燒結特性研究“(2016).
  5. Che-Hao Chuang, Shun-Feng Tsai, Yao-Ming Wang, Tai-Chen Cheng, and Horng-Yi Chang,“CeO2 nano-coating on barium strontium ferrate and that co-firing with ceria-based electrolyte“(2016).
  6. Horng-Yi Chang1, Yao-Ming Wang, Chia-Hsin Lin and Ching-Iuan Sheu,“Evaluation of ceria modified ferrate cathodes and their cofiring on ceria-based SOFC“(2016).
  7. 王耀明,林明憲,邱德威,陳泰丞,張宏宜,“層狀鈣鈦?Pr2NiO4與CeO2之複合陰極應用於中溫固態氧化物燃料電池特性探討“(2016).
  8. Chien-Yie Tsay, Yi-Hsiang Lin, Yao-Ming Wang, Horng-Yi Chang, Chien-Ming Lei, and Shien-Uang Jen,“Electrical transport properties of CoMn0.2-xGaxFe1.8O4 ferrites using complex impedance spectroscopy“(2016).
  9. Yao-Ming Wang, Tai-Cheng Chen, Horng-Yi Chang,“Interface-matching for Barium Strontium Ferrate–Ceria by Drop-coating Buffer Layer“(2016).
  10. 王耀明,柯复听,陳泰丞,張宏宜,“鐵系鈣鈦?陰極材料應於於中溫固態氧化物燃料電池之特性研究“(2015).
  11. 柯复听,王耀明,張宏宜,“電極薄層三相界面之鈰基固態氧化物燃料電池效率研究“(2015).
  12. 鄭舒庭,張祐寧,吳鎮宇,張宏宜,“微波水熱碳球模板成長Y2O3:Eu3+螢光粉之研究“(2015).
  13. 吳鎮宇,雷健明,張宏宜 ,“微波尿素溶劑熱合成Y2O2S:Eu3+螢光體與特性研究“(2015).
  14. 柯复听,王耀明,張宏宜,“鈰基薄層電解質印刷於鈣鈦礦多孔陽極之特性研究“(2014).
  15. Chen-Yu Wu*, Chien-Ming Lei, Mei-Lun Wu, Li-Jiaun Lin, and Horng-Yi Chang*“Cerium Shell Effects on Lanthanum Strontium Titanate Anode Under Reduction-Oxidation Atmosphere“(2014).
  16. Horng-Yi Chang*, Yao-Ming Wang,“Growth of Hydrolyzed and Solvolyzed Y2O3 Phosphors using Efficient Energy“(2014).
  17. Horng-Yi Chang*, Chia-Ming Chang, Yao-Ming Wang, Ching-Iuan Sheu, Chia-Hsin Lin, Ying-Chang Hung,“Structural Stability of Ce-coated (Ba0.5Sr0.5)FeO3 and Characterization“(2013).
  18. 王耀明,林國立,林家欣,張宏宜,“鈰殼層擴散在La0.3Sr0.7TiO3鈣鈦礦結構之電性研究“(2013).
  19. 曾韋傑,吳美倫,林麗娟,張宏宜,“可撓式波浪形Ti/TiO2/In2S3/CuInS2光敏電池製作與研究“(2012).
  20. 楊宙圃,吳鎮宇,張宏宜,“鑭系氧化物藍光奈米螢光體液相製備與研究“(2012).
  21. 楊宙圃,吳鎮宇, 黃國政,羅雲山,沈怡妏,王興嘉,張宏宜,“非水系製程製備奈米膠體之Y2O3:Ho3+螢光體發光特性研究“(2012).
  22. H.Y. Chang, C.Y. Wu, J.P. Yang, D. Huang, Y.S Lo, I.W. Shen, H.C. Wang ,“Blue Light Excited Nanophosphors Synthesized by Soft Wet Methods“(2012).
  23. Y.M. Wang, H.Y. Chang,“Characterization of Lanthalum Strontium Titanates - CeO2 Composite Anode Material in Reduction and Oxidation Atmospheres“(2012).
  24. Y.M. Wang, C.M. Lei, H.Y. Chang,“Electrical Properties of Lanthanum Strontium Titanates Modified by Microwave Sintering“(2012).
  25. C.H. Yi, C.H. Lin, Y.H. Wang, S.Y. Cheng, H.Y. Chang,“Fabrication and Characterization of Flexible PZT Fiber and Composite“(2012).
  26. H.Y. Chang, C.H. Yi, C.H. Lin, S.Y. Cheng,“Flexible Flat Composite Fibers Synthesis and Characterization“(2012).
  27. 張家銘,王耀明,張宏宜,“奈米螢光體的幾何形狀對激發光散射特性之研究“(2012).
  28. 張家銘,王耀明,張宏宜,“離子性調控電子性的鑭鍶鐵氧化物電極阻抗分析研究“(2012).
  29. 王耀明,林國立,張宏宜,“(La0.7Sr0.3)(Cr1-xMx)O3複合陽極之燒結特性研究“(2011).
  30. 易崇皓,方彥閔,林家欣,張宏宜,“縮合水浴法製備PZT纖維之特性研究“(2011).
  31. 張家銘,王耀明,張宏宜,“鋇鍶鐵氧化物陰極薄緻密層之固態氧化物半電池特性研究“(2011).
  32. Y.M. Wang, C.W. Lai and H.Y. Chang,“Evaluation of composite anode on doped CeO2 electrolyte prepared by microwave sintering“(2011).
  33. H.Y. Chang, S.H. Wang, Y.M. Wang and C.W. Lai,“Functional Layers Design between Multiple Doped Electrolyte and Perovskite Electrodes“(2011).
  34. 張家銘,張宏宜, “鋇鍶鐵氧化物與CeO2基電解質混成結合之特性研究“(2010).
  35. H.Y. Chang, C.Y. Wu,“Inorganic Photosensitive Coating on TiO2 Nanotube Arrays“(2010).
  36. H.Y. Chang, S.H. Wang, C.W. Lai,“Investigation on Doping Perovskite Mixed Ionic Electronic Conductor“, presented at Electroceramics XII, Trondheim, Norway, 13-16 June, 2010. (NSC 98-2622-E-019-005-CC3)
  37. H.Y. Chang, C.Y. Wu,“Inorganic Photosensitive Coating on TiO2 Nanotube Arrays”, presented at Electroceramics XII, Trondheim, Norway, 13-16 June, 2010. (NSC 98-2221-E-019 -010)
  38. H.Y. Chang, W.J. Tzeng,“Stoichiometry of Photosensitive CuInS2 Coating into TiO2 Nanotubes”, presented at TACT 2009 International Thin Films Conference, December 14-16, Taipei, Taiwan, 2009. (NSC 98-2221-E-019 -010)
  39. Y.M. Wang, H.Y. Chang,“Microwave Sintering Multi-doped Solid Electrolyte”, presented at International Symposium on Advanced Ceramics and Technology for Sustainable Energy Applications, Taipei, Taiwan, Nov. 1-4, 2009. (NSC 98-2622-E-019-005-CC3)
  40. H.Y. Chang, Yao-Ming Wang, “Low-Temperature Prepared Multi-elements Doped CeO2 Electrolyte”, presented at The 7th International Fuel Cell Science, Engineering & Technology Conference, Newport Beach, California USA, 8-10 June, 2009.
  41. H.Y. Chang, W.J. Tzeng, "Modification of TiO2 nanotube arrays by solution coating", presented at Electroceramics XI, University of Manchester, UK, 1-4 September, 2008. (NSC 96-2218-E-019-002)
  42. H.Y. Chang, Y.R. Wang, M.L. Wu,L.J. Lin, "Preparation of red cathodoluminescent nano-phosphors by solvo/hydrothermal process", presented at Electroceramics XI, University of Manchester, UK, 1-4 September, 2008. (NSC 97-2221-E-019 -002)
  43. H.Y. Chang, W.J. Tzeng, “Anodized Titanium Oxide Nanotubes and Inner Core-shell Structure”, presented at The 4th International Conference on Advances of Thin Films and Coatings (Thin Films 2008), Singapore, 13-16 July, 2008. (NSC 96-2218-E-019-002)
  44. W.J. Tzeng, H.Y. Chang, “Mesoporous structure and properties of Titania nanotube arrays”, presented at International Symposium on Advanced Ceramics and Technologies for Sustainable Energy Applications (ACTSEA-2007), Pingtung, Taiwan, 4-7 November, 2007. (NSC 96-2218-E-019-002)
  45. H.Y. Chang , C.I. Sheu , S.Y. Cheng , H.C. Wu, Z.Z. Guo, “Synthesis of LiNi 1/3 Co 1/3 Mn 1/3 O 2 Cathode Material using Spray-Microwave Method”, presented at IMLB 2006 - International Meeting on Lithium Batteries, Biarritz , France , June 18 - June 23, 2006
  46. H.Y. Chang , Y.H. Wang , C.I. Sheu, S.Y. Cheng, “Microwave enhanced ferroelectric films growth”, Electroceramics X, Toledo, Spain, 18-22 June 2006
  47. H.Y. Chang , S.Y. Cheng, C.I. Sheu and Y.J. Yang , “Particles Interface Modification in Microwave Energy Field”, presented at International Conference in Asia, IUMRS-ICA, Hsinchu Taiwan , November 16-18, 2004.
  48. Y.J. Yang, C.I. Sheu, S.Y. Cheng, H.Y. Chang , “Surface Modification with Si-Ca Species and Microwave Densification for Ni-Zn Ferrite”, presented at the Ninth International Conference on Ferrites (ICF-9) proceedings, San Francisco , USA , August 23–26, 2004.
  49. H.Y. Chang , S.Y. Cheng, C.I. Sheu, “Electrical Properties Adjustable Grain Boundary Functional Film by Laser Annealing”, presented at Processing and Characterisation of Nanomaterials International Workshop, Warsaw , Poland , Oct. 7-9, 2003.
  50. H.Y. Chang , S.Y. Cheng, C.I. Sheu, “Multilayer Ferroelectric Film Deposited by Supersonic Jet and Laser Annealing”, presented at the 104 th Annual Meeting of the American soceramic Society, St. Louis , USA , April 28-May 1, 2002.
  51. H.Y. Chang , C.I. Sheu, S.Y. Cheng, “Enhencement on Crystallization of Pb(Zr 1-x Ti x )O 3 and (Pb 1-y Ca y )TiO 3 Thin Films by Incorporation of Nano-sized Particles in metal Organic Decomposition Process”, presented at the 103 th Annual Meeting of the American soceramic Society, Indianapolis , USA , April 22-25, 2001.
  52. H.Y. Chang, K.S. Liu and I.N. Lin, “Abnormal Resistivity-Temperature Characteristics of Semiconducting (Ba 1-x Pb x )TiO 3 Materials Prepared by Microwave sintering”, presented at the Third Pacific-Rim Ferroelectric Symposium, Kyoto , Japan , May 27-29, 1996.
  53. H.Y. Chang, K.S. Liu and I.N. Lin, "Modification on PTCR Behavior of (Sr 0.2 Ba 0.8 )TiO 3 Materials by Post-heat treatment After Microwave Sintering", presented at the Third Pacific-Rim Ferroelectric Symposium, Kyoto , Japan , May 27-29, 1996.
  54. H.Y. Chang , I.N. Lin, C.T. Hu and H.W. Chen, “High Critical Temperature PTCR Materials (Pb 0.6 Sr 0.3 Ba 0.1 )TiO 3 Prepared by Microwave Sintering Technique”, presented at First Asian Meeting on Ferroelectrics (AMF-1), Xi‘an, China, October 5-8, 1995.
  55. I. N. Lin, H.Y. Chang , “Microwave Sintering of Semiconducting Perovskite and Their Electrical Properties”, presented at An International Conference on the Science, Technology, and Applications of Sintering, University Park , PennState , U.S.A. , September 24-27, 1995.
  56. H.Y. Chang, K.S. Liu and I.N. Lin, "PTCR Behavior of (Sr 0.2 Ba 0.8 )TiO 3 Material Prepared by Microwave Sintering", presented at IUMRS International Conf. on Electronic Materials (IUMRS-ICEM'94), Hsinchu , Taiwan , Dec. 19-22, 1994.
  57. H.Y. Chang , K.S. Liu, H.W. Chen, C.T. Hu, I.N. Lin, B.J. Shaw and J.T. Tan, "V-shape Temperature Coefficient Resistivity (PTCR) Characteristics of (Sr 0.4 Pb 0.6 )TiO 3 Materials Prepared by Microwave Sintering", presented at the 2rd IUMRS International Conf. in Asia (IUMRS-ICA), Hsinchu , Taiwan , Dec. 14-18, 1994.
  58. H.C. Yuan, H.Y. Chang , K.S. Liu and I.N. Lin, “Microwave Asisted Sintering of PZT Series Piezoelectric Ceramics”, Proc. 1995 Annual Conf. Chinese Soc. Mater. Sci., II, 80-81(1995).
  59. H.Y. Chang, K.S. Liu, T.F. Lin, I.N. Lin, “PTCR Characteristics of (Ba,Pb)TiO 3 Ceramics by Microwave Sintering”, Proc. 1995 Annual Conf. Chinese Soc. Mater. Sci., II, 252-253(1995).
  60. H.Y. Chang , K.S. Liu and I.N. Lin, "Microwave Sintering of Microwave Dielectrics", Proc. 1994 Annual Conf. Chinese Soc. Mater. Sci., I, 176-177(1994).
  61. H.Y. Chang , K.S. Liu and I.N. Lin, "PMN Perovskite Ceramics Synthesized by Freeze Drying and Spray Pyrolysis", Proc. 1989 Annual Conf. Chinese Soc. Mater. Sci., II, 893-896(1989).

[C] Patents

  1. 張宏宜,鄭世裕,”微波加熱的熱集中結構”,中華民國專利申請案號P54950040TW (2010).
  2. 朱國瑞,柏賴德,張存續,張宏宜,姜惟元,余青芳,戴伶潔,鄭世裕,寇崇善,”Quasi-optical Material Treatment Apparatus”,美國專利發明US7381932 (2008)。
  3. 張宏宜,鄭世裕,許清淵,王譯慧,”可撓性複層壓電材結構及其製作方法”,中華民國專利發明第I290778號 (2007)。
  4. 朱國瑞,柏賴德,張存續,張宏宜,姜惟元,余青芳,戴伶潔,鄭世裕,寇崇善,”近光學式材料處理裝置”,中華民國專利發明第I252063號 (2006)。
  5. 張宏宜,張存續,連曼均,鄭世裕,盧佳卉,方文志,”可調式材料處理裝置”,中華民國專利發明第I260816號 (2006)。
  6. 宏宜,鄭世裕, ” 高微波能量場集波設計與結構 ” ,中華民國專利申請案號 P54950040TW (2006).
  7. 張宏宜,鄭世裕,許清淵,王譯慧, ” 可撓性複層壓電材結構及其製作方法 ” ,中華民國專利申請案號 P05940045TW (2005 ) 。
  8. 張宏宜,鄭世裕,許清淵, ” 具有高介電膜層之有機基板及其製造方法 ” ,中華民國專利發明第 I238026 號 (2005)
  9.    朱國瑞,柏賴德,張存續,張宏宜,姜惟元,余青芳,戴伶潔,鄭世裕,寇崇善, ”QUASI-OPTICAL MATERIAL TREATMENT APPARATUS” ,美國專利 申請案號 P05930081US (2004 ) 。
  10. 張宏宜,鄭世裕,許清淵, ” 積體化薄膜被動元件之製造方法及其結構 ” , 中華民國專利發明第 195323 號 (2004) 。

 

-TOP